SAMlink Control Systems

Thu, 6 Sep 2018 09:42:00 GMT

SAMlink Control Systems
Buy Now: $0.00

Designed to control SAM units from a remote console or panel. Linked individually or in groups, an operator can increase or reduce airflow to a selected area and utilize the set back feature during off-peak hours, resulting in lower operating costs. The exclusive state-of-the-art, reasonably priced fan filter control systems utilize the standard 115 volt and 277 volt, motor blower units without using high cost DC motors. A typical system consists of an address or groups of addresses with four or more SAM units per address. Each address is controlled by a panel or wall mounted console.

Each address includes the following components:

Group of 4 SAM 24 Fan Filter Units consisting of 1 Master Unit and 3 Slave Units

Choice of 115 or 277 volt AC impeller type motor blower assembly

Control Console, panel or wall mounted

With L.E.D. readout and user friendly control features

Wiring for each group of 4 SAM units

HEPA or ULPA Filters with 53 mm media pack

Precise Airflow Control: SAM units are controlled individually or in groups, typically 1-4 units per address. Fan speeds are set and/or adjusted from a console located outside the cleanroom without breaching the integrity of the cleanroom. Three levels of adjustment are possible: Individual address, Cleanroom zone and/or Globally. The number of addresses is almost unlimited. Room or equipment layouts with unique airflow requirements are easy to set and control.

Lower Installation & Maintenance Costs: Installation is seamless and quick. Fewer breaker lines reduce material and electrical contractor costs. Reductions in on-site power distribution wiring lower contractor labor cost. Installation cost is lower as a result of simplified balancing and adjusting capabilities along with reducing the time required at start-up. Reduced certification costs. Re-calibration and balancing of rooms is simplified. Small zone shut-down enables isolated upgrade or maintenance operations to take place without disrupting or affecting the integrity of the cleanroom.

Soft Start Capability: SAMlink Systems with adjustable soft start holds start-up to under 0.8 amperes per 277 Volt SAM unit. This results in major cost savings during installation, reducing electrical breaker requirements by as much as 50%.

Benefits & Features

Flexible, Energy Efficient, User-Friendly Systems

HEPA or ULPA Filters with 70mm deep pleated design

Increased operating efficiency

Either NCR or CRF Style SAM units

Single or multiple SAM units per control address

Factory wired junction boxes with integral distribution wiring

Substantially reduction with on-site electrical work

Visit Control Systems to see additional products in this category.

Hutchins & Hutchins | Your Cleanroom Supplier® - Cleanrooms & HEPA Filtration / Filtration Equipment / Control Systems / All Products

SAMlink Control Systems