30 percent ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned. The housings are fabricated from steel with a white powder coat finish and include seismic clip suspension points. The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz). Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards
Benefits & Features
The standard HEPA filter is 99.99 percent eff.ULPA grade 99.9995 percent eff. filter is an available optionOptions include an 8ft power cord (115 Volt only), 99.9995 percent eff. ULPA grade final filter, UL 900 filters and duct collar adapters.NCR Style Filter Data: The HEPA Filters are designed for 90 FPM average face velocity at initial 0.47 w.g. and have a rated efficiency of 99.99 percent at 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters can be replaced by removing unit from ceiling, placing on a bench, removing and replacing the filter and re-installing unit in ceiling.
Low Profile: All SAM MicroSound NCR Style Models are 12.625 inches high.
Standard Ceiling Size: All 2ft X 4ft models are designed to fit a nominal 2ft X 4ft ceiling grid with a 22.5” X 46.5” standard opening.
Air Flow: Airflow ranges from 400 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 632 on a 2 x 4 and 300 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20 percent less.
Sound Level: At average face velocity of 90 FPM measured 30 inches from face of filter, sound level is approximately 54 dba with less than 45 dba ambient sound level. Field conditions, voltage and method of testing could produce different results.